-1200x900.jpg)
.jpg)
.jpg)
Caring for oak products with OCV826 acrylic varnish: protection, durability and tips
Oak is one of the strongest and noblest materials for making furniture and interiors. To fully reveal its beauty and ensure a long service life, craftsmen use high-tech paint and varnish materials. One of the most reliable solutions is OCV826 acrylic varnish from Kemichal, which combines aesthetics and extraordinary wear resistance.
In this article, you will learn how to properly care for oak products with such a coating, avoid damage and maintain their impeccable appearance for years.
1. General properties of the coating
OCV826 acrylic varnish is an ultra-matte finish (03 gloss) that forms a thin, transparent, but durable protective layer. Its advantages:
Forms a hard, elastic and wear-resistant coating that does not crack or wear off even with active use.
It has high resistance to abrasion, impacts and household dirt (wear resistance class AC6).
It is not afraid of grease, food liquids and short-term contact with water.
It does not turn yellow over time, retains a uniform ultra-matt shine.
Emphasizes the natural texture of oak without changing its natural color.
This coating creates the perfect balance between aesthetics and practicality, making oak products reliable and at the same time elegant.
2. Daily care
Regular and delicate care is the key to the durability of the varnish coating:
Wipe the surface with a dry or slightly damp microfiber cloth.
If necessary, use a neutral detergent with a pH of 6–8 diluted with water.
After cleaning, be sure to wipe the surface dry to avoid residual moisture.
Remove light stains without intensive rubbing so as not to damage the ultra-matt layer.
3. What not to use ⚠️
To avoid damaging the acrylic coating, avoid any aggressive products or tools. Prohibited:
Products containing:
rubbing alcohol (ammonia)
alcohols or solvents (ethanol, isopropanol, acetone)
alkaline or acidic components (soda, vinegar, citric acid)
highly concentrated surfactants
silicones, waxes and polishing pastes
Abrasive sponges or cloths - they leave micro-scratches.
A large amount of water or steam cleaners.
❗ Typical mistakes: using glass cleaners, universal household cleaners or wax polishes - they destroy the protective layer and leave stains.
4. Removing complex dirt
Even the most careful use does not exclude the appearance of stains. To remove stubborn stains:
Apply a small amount of neutral detergent to the stain.
Leave for 2-5 minutes to soften the dirt.
Gently wipe with a soft cloth and dry the surface immediately.
Do not scrape off the residue with hard objects - this may leave scratches.
If the stain does not disappear, repeat the procedure, increasing the exposure time, not the force of friction.
5. Furniture operating conditions
Stable environmental conditions are an important component of the durability of oak products:
Avoid direct sunlight, which can discolor the wood and varnish.
Maintain a humidity of 40-60% and a temperature of 18-25°C in the room.
Always use coasters for hot dishes.
Do not place damp or wet objects without pads to avoid stains and swelling.
6. Periodic maintenance (1–2 times a year)
Even the most durable coating needs a light touch-up over time:
Check the surface for scratches, chips or loss of shine.
In case of damage, contact a specialist who will lightly sand and apply a new thin layer of varnish.
Such a preventive update preserves the protective properties and appearance of the product as new.
7. Recommendations
By following these simple tips, you will extend the life of your oak products for decades:
Regularly clean the surfaces, prevent the accumulation of dust and dirt.
Use only soft fabrics and neutral products.
Protect furniture from sudden changes in humidity, temperature and ultraviolet light.
Remember: OCV826 varnish from Kemichal is designed for durability, but it is the right care that makes it limitless.
Write a comment